This module can be used to enhance the basic single Bypass with an additional effects loop.
Bill of materials: bypassmodul_BOM_en
Wiring Layout: bypassmodul
Here´s an example for a double Bypass/looper: bypassdopp
And here´s 4x Bypass/Looper, with Tuner Out and Master Bypass: 5fachloopwire
The Master Bypass switch is intended for Loopers with 2 or more loops. It is quite difficult to switch more than 2 switches fast and safe while playing your instrument. The Master Bypass switch is doing that for you with one click.
The Master Bypass mode is displayed by a status LED.
Wiring layout: masterbyaddon (198kB)
This Tuner Mute Addon can be added to nearly any Switcher, Looper or effects pedal. This circuit is placede first after the Input jack and before the first footswitch of the device.
It enables silent tuning, the tuner mode is displayed by a status LED.
Wiring layout: tunermuteaddonwire (204kB)
The Loop Selector can be used to switch one of two effect groups alternating into the signal chain.
Wiring layout: loopselector
The Splitter is an active buffered signal splitter. A guitar signal can be sent to two different amps or effect chains. Perfect for stereo applications.
Parts list: splitterbomde
Schematic and pcb: splitterschalt
Wiring layout: splitterwire
The Changer can be used to reverse the order of two pedals or chains. Lopp A into Loop B or B into A, as you like it. For example you can do a Distortion into a Tremolo, or the Tremolo into the DIstortion, you get two different sounds. Of course other effects are also interesting.
Wiring layout: changerwire2
The single Bypass switches an effect loop into the a signal chain.Good for non-true-bypass effects.
Using only the send of the Loop to connect a Tuner, you also can use it as a Mute pedal for silent tuning!
Wiring Layout: bypassein
The double Bypass can be used to switch 2 effect loops. Two ore more pedals can be switched easily into and out of the signal.
Wiring layout: bypassdopp
With the A/B/Y switch you can easily switch one signal between two single outputs (A/B), or put it on both outputs (Y). The first switch switches between outputs A and B, the second switch (Y), switches the input on both outputs.
Wiring layout: abywire
The A/B(C switch can be used to switch between one signal on 3 different outputs or 3 signals on one input. The first switch (A) switches between A and A/B, the second switch (B/C) switches between B and C.
Wiring layout: abcwire
The A/B Switch can be used to switch a signal between to outputs or one of two signals on one Input. For example you can switch a guitar in to two different effect chains.
Wiring layout: abwire